PRO1 · Standalone
PRO1 T751 Non-Programmable Universal Thermostat
The T751 is a non-programmable thermostat for conventional multistage systems or heat pumps.
Will this work with my system?
Match your equipment to these requirements before ordering.
Works with
- Staging: Up to 2 heat / 2 cool conventional; 3 heat / 2 cool heat pump
System requirements
- Power: 2 AA alkaline batteries or 18–30 VAC, NEC Class II, 50/60 Hz
- Electrical load limits: 1 A per terminal; 1.5 A maximum combined
Check before you buy
- Match the full T751 model number and hardware revision to the manufacturer's equipment manual and accessory list.
- Compare the equipment terminals, control voltage and required operating sequence with the model-specific installation diagrams.
Manufacturer documentation (2)
Use these documents to compare your exact model and configuration.
Overview
The T751 is a non-programmable thermostat for conventional multistage systems or heat pumps. It supports up to two heating and two cooling stages for conventional equipment, or three heating and two cooling stages for heat pumps.
Its 7-square-inch blue-backlit display and adjustable setpoint limits support local control. Automatic changeover is available outside PTAC mode, subject to installer configuration.
The thermostat can use two AA alkaline batteries or a suitable hardwired supply. Use the exact-model installation manual to match the thermostat configuration, equipment and wiring before installation.
Product details
- Manufacturer
- Pro1 iAQ
- SKU
- 105419
- Model / MPN
- T751
- Condition
- New
- Lifecycle
- Current
Specifications
- Stage modes
- Up to 2 heat / 2 cool conventional; 3 heat / 2 cool heat pump
- Scheduling modes
- Non-programmable
- Power sources
- 2 AA alkaline batteries or 18–30 VAC, NEC Class II, 50/60 Hz
- Setpoint range
- 44 to 90 °F (7 to 32 °C)
- Operating temperature
- 32 to 105 °F (0 to 41 °C)
- Operating humidity
- 90% RH maximum, non-condensing
- Backlit display
- Blue backlight
- Contact ratings
- 1 A per terminal; 1.5 A maximum combined
- Setpoint limits
- Adjustable heating maximum and cooling minimum; see installer settings
- Measurement channels
- Temperature display range: 41 to 95 °F (5 to 35 °C)