PRO1 · Standalone
PRO1 T725 Programmable Heat Pump Thermostat
The T725 offers programmable control for a conventional single-stage system or a heat pump with up to two heating stages and one cooling stage.
Will this work with my system?
Match your equipment to these requirements before ordering.
Works with
- Staging: 1 heat / 1 cool conventional; 2 heat / 1 cool heat pump
System requirements
- Power: 2 AA alkaline batteries or 18–30 VAC, NEC Class II, 50/60 Hz
- Electrical load limits: 1 A per terminal; 1.5 A maximum combined
Check before you buy
- Match the full T725 model number and hardware revision to the manufacturer's equipment manual and accessory list.
- Compare the equipment terminals, control voltage and required operating sequence with the model-specific installation diagrams.
Manufacturer documentation (2)
Use these documents to compare your exact model and configuration.
Overview
The T725 offers programmable control for a conventional single-stage system or a heat pump with up to two heating stages and one cooling stage. Scheduling can be set for seven individual days, weekdays with separate Saturday and Sunday settings, or disabled.
A 4-square-inch blue-backlit display provides local controls. Emergency heat is available for the applicable heat-pump configuration.
The thermostat can use two AA alkaline batteries or a suitable hardwired supply. Use the exact-model installation manual to match the thermostat configuration, equipment and wiring before installation.
Product details
- Manufacturer
- Pro1 iAQ
- SKU
- 105418
- Model / MPN
- T725
- Condition
- New
- Lifecycle
- Current
Specifications
- Stage modes
- 1 heat / 1 cool conventional; 2 heat / 1 cool heat pump
- Scheduling modes
- 7-day, 5/1/1-day or non-programmable
- Power sources
- 2 AA alkaline batteries or 18–30 VAC, NEC Class II, 50/60 Hz
- Setpoint range
- 44 to 90 °F (7 to 32 °C)
- Operating temperature
- 32 to 105 °F (0 to 41 °C)
- Operating humidity
- 90% RH maximum, non-condensing
- Backlit display
- Blue backlight
- Contact ratings
- 1 A per terminal; 1.5 A maximum combined
- Setpoint limits
- Adjustable heating maximum and cooling minimum; see installer settings
- Measurement channels
- Temperature display range: 41 to 95 °F (5 to 35 °C)